How do I get the latest Cisco CCDE 352-001 exam dump? Share the latest 352-001 exam dumps, 352-001 pdf, and online hands-on tests for free to improve skills and experience, with Lead4pass providing the latest and complete Cisco CCDE 352-001 dumps: https://www.lead4pass.com/352-001.html (Latest Update)
Free effective Cisco CCDE 352-001 video tutorial
Cisco CCDE 352-001 exam pdf free download
[PDF Q1-Q13] Free Cisco CCDE 352-001 pdf dumps download from Google Drive: https://drive.google.com/open?id=1PbdygBK6H_S9-2DJp4-eDoXSKr-SVVqX
Latest Update Cisco CCDE 352-001 Online Exam Practice Questions
To improve the stability of a global network, you have been tasked with changing the design to include link-state
topology summarization. What are two issues that you should address as part of the design? (Choose two.)
A. slow convergence
B. suboptimal routing
C. traffic black-holing
D. packet reordering
Correct Answer: BC
To improve the stability of the network and protect it from intrusions, you must design control plane security.
Which two features should you enable as part of this design? (Choose two.)
A. SNMP security
D. IP receive ACL
E. control plane policing
F. role-based CLI access
Correct Answer: DE
You are working on a network design plan for a company with approximately 2000 sites. The sites will be connected
using the public Internet. You plan to use private IP addressing in the network design, which will be routed without NAT
through an encrypted WAN network. Some sites will be connected to the Internet with dynamic public IP addresses, and
these addresses may change occasionally. Which VPN solution will support these design requirements?
A. GET VPN must be used, because DMVPN does not scale to 2000 sites.
B. DMVPN must be used, because GET VPN does not scale to 2000 sites.
C. GET VPN must be used, because private IP addresses cannot be transferred with DMVPN through the public
D. DMVPN must be used, because private IP addresses cannot be transferred with GET VPN through the public
E. GET VPN must be used, because DMVPN does not support dynamic IP addresses for some sites.
F. DMVPN must be used, because GET VPN does not support dynamic IP addresses for some sites.
Correct Answer: D
A. IPv6 is transparent on Layer 2 switches, so there is no need to make any changes to the Layer 2 switches.
B. If IPv6 anycast deployment is planned, then make sure that Layer 2 switches support ICMPv6 snooping at Layer 2
C. If IPv6 anycast deployment is planned, then make sure that Layer 2 switches support DHCPv6 snooping at Layer 2
D. If IPv6 multicast deployment is planned, then make sure that Layer 2 switches support MLD snooping at Layer 2
E. If IPv6 anycast deployment is planned, then make sure that Layer 2 switches support ND snooping at Layer 2
Correct Answer: AD
A customer with a dedicated Frame Relay network plans to move its circuits onto a service provider converged MPLS
network. Instead of moving to Ethernet access links right away, the customer wants to tunnel the Frame Relay
information across the converged network. In which way is QoS information transmitted across an AToM pseudowire
when tunneling Frame Relay traffic?
A. QoS information cannot be transported through a pseudowire and is dropped.
B. QoS information is preserved in the Frame Relay header and encapsulated into the pseudowire frame.
C. QoS information is carried in a control word that is attached to the MPLS frame.
D. QoS information is translated into ToS bits in the Ethernet header.
Correct Answer: C
Which two statements define some of the general characteristics of SDN? (Choose two.)
A. Southbound interfaces are interfaces used between the control plane and the date plane.
B. OpenFlow isconsidered one of the first Northbound APIs used by SDN controllers.
C. Northbound interfaces are open interfaces used between the control plane and the date plane.
D. The separation of the control plane from the data plane.
E. OVSDB is an application database management protocol.
Correct Answer: AE
You are designing an 802.11 wireless network to include a controller as a central configuration point and access points
across several remote sites. Which two aspects will manage the flow of the traffic to meet these design considerations?
A. WLAN local switching with VLAN mapping requires that VLAN ID that is mapped on the AP to match a dynamic
interface that is configured on the wireless LAN controller.
B. Layer 3 roaming is not supported for locally switched WLANs.
C. The 802.1x authentication for a client associated to an AP on a locally switched WLAN is always handled at the
wireless LAN controller side.
D. The access point can receive multicast traffic in the form of multicast packets from the WLC.
E. WLAN access lists can be applied only to centrally switched WLANs.
Correct Answer: BE
You must design this network for IP Fast Reroute by enabling the OSPF Loop-Free Alternates feature (not Remote
Loop-Free Alternates). Which two options are concerns about the proposed solution? (Choose 2)
A. OSPF Loop-Free Alternates is not supported on ring topologies.
B. OSPF Loop-Free Alternates on ring topologies are prone to routing loops.
C. Fast Reroute requires MPLS TE.
D. The solution is prone to microloops in case of congestion
E. OSPF Loop-Free Alternates is transport dependent.
Correct Answer: AD
A company plans to include Nonstop Forwarding and Bidirectional Forwarding Detection as a part of their network
redundancy plan. In which two ways do NSF and BFD work together when different hardware platforms are compared?
A. During supervisor engine or routing engine failover, the NSF feature will always ensure that the BFD at the peer
router will not trigger a link down independent of the used hardware platform.
B. At some hardware platforms, BFD and NSF are not supported together. During supervisor engine or routing engine
failover, the BFD at the peer router will trigger a link down.
C. To ensure that BFD at the peer router will not trigger a link down during NSF, the BFD packets must be processed
fast enough, and, during supervisor engine or routing engine failover, by processing the BFD independent from the
supervisor engine or routing engine.
D. Because BFD is always processed at the line cards (not at the supervisor engine or routing engine), a supervisor
engine or routing engine failover will not affect the BFD peer router.
E. Because BFD is always processed at the supervisor engine or routing engine, a supervisor engine or routing engine
failover will always trigger a link down at the peer router.
Correct Answer: BC
Refer to the exhibit.
In this network, R1 is redistributing 10.1.5.0/24 into Area 1. Which LSA containing 10.1.5.0/24 will R6 have in its
A. R6 will have an NSSA external (type 7) LSA in its local database for 10.1.5.0/24.
B. R6 will have an external (type 5) LSA for 10.1.5.0/24 in its local database.
C. R6 will have a border router (type 4) LSA in its local database for 10.1.5.0/24.
D. R6 will not have any LSAs containing 10.1.5.0/24.
Correct Answer: D
Which interconnectivity method offers the fastest convergence in the event of a unidirectional issue between three Layer
3 switches connected together with routed links in the same rack in a data center?
A. Fiber Ethernet connectivity with UDLD enabled
B. Copper Ethernet connectivity with BFD enabled
C. Fiber Ethernet connectivity with BFD enabled
D. Copper Ethernet connectivity with UDLD enabled
Correct Answer: C
In a rented office, workers are not assigned to specific cubes. The facility just began to use IEEE 802.1X authentication
for the tenants. When workers have previously logged in to a PC, it works correctly, but when they move to another PC
that has never been used before, they are unable to log in. Which redesign action will overcome this issue with minimal
A. Use machine authentication.
B. Establish a “Bring Your Own Device” portal.
C. Disable and re-enable network authentication when a new worker logs in to a new machine.
D. Enable MAC Authentication Bypass.
Correct Answer: A
A client has approached you about deploying very fast IS-IS hello timers across an intercontinental high speed SONET
What should you recommend?
A. Fast hello timers are a good choice for this link because on long haul SONET links the reporting of LINE and PATH
errors can take a long time.
B. Fast hello timers are not a good choice for this link because the link is physically long and the propagation delay may
cause IS-IS to believe the link has failed when it has not.
C. Fast hello timers are a good choice for this link because the length of the link indicates there will be at least one
SONET amplifier that disables PATH alarms on the circuit.
D. Fast hello timers are not a good choice for this link because SONET links provide link- down notification much faster
than IS-IS could detect a circuit failure by means of hello processing.
Correct Answer: D
Share lead4pass discount codes for free 2020
About the benefits and introductions of Lead4Pass
Lead4pass offers the latest exam exercise questions for free! Cisco exam questions are updated throughout the year. Lead4Pass has many professional exam experts! Guaranteed valid passing of the exam! The highest pass rate, the highest cost-effective! Help you pass the exam easily on your first attempt.
Exammarkers shares the latest Cisco CCDE 352-001 exam dumps,352-001 pdf,352-001 exam exercise questions for free. You can improve your skills and exam experience online to get complete exam questions and answers guaranteed to pass the exam we recommend Lead4Pass 352-001 exam dumps
Latest update Lead4pass CCDE 352-001 exam dumps: https://www.lead4pass.com/352-001.html (705 Q&As)
[Q1-Q13 PDF] Free Cisco CCDE 352-001 pdf dumps download from Google Drive: https://drive.google.com/open?id=1PbdygBK6H_S9-2DJp4-eDoXSKr-SVVqX